随机功能梯度材料梁的动力特性分析

doi:10.3969/j.issn.1001-2400.2015.06.018

J4 ›› 2015, Vol. 42 ›› Issue (6): 99-105.doi: 10.3969/j.issn.1001-2400.2015.06.018

随机功能梯度材料梁的动力特性分析

陈永琴;徐亚兰

(西安电子科技大学机电工程学院，陕西西安 710071)

收稿日期:2014-07-09 出版日期:2015-12-20 发布日期:2016-01-25
通讯作者: 陈永琴
作者简介:陈永琴(1971-), 女, 副教授，博士，E-mail: microeng@nwpu.edu.cn．
基金资助:
中央高校基本科研业务费专项资金资助项目(JY10000904012)；国家863高技术研究发展计划资助项目(2006AA04Z402)

Dynamic characteristics analysis for the random FGM beam

CHEN Yongqin;XU Yalan

(School of Mechano-electronic Engineering, Xidian Univ., Xi'an 710071, China)

Received:2014-07-09 Online:2015-12-20 Published:2016-01-25
Contact: CHEN Yongqin

摘要/Abstract

摘要：

由于功能梯度材料制备工艺的多样性与复杂性，造成其等效物性参数表现出明显的随机特征．考虑剪切变形，基于高阶剪切变形理论，建立了材料特性呈轴向连续变化分布的功能梯度材料梁的有限元模型，并在此基础上，利用随机变量函数的矩法，推导出动力特性统计数字特征的计算公式．综合考查材料热物参数的随机性在不同组分体积指数下对功能梯度材料梁动力特性的影响，并利用蒙特卡洛仿真进行了验证．结果表明，组分材料物性参数的随机性对动力特性分散性的贡献随体积组分指数的变化而变化；在体积组分指数确定的情况下，相比较仅考虑单一参数随机性的情况，同时考虑多个材料物性参数的随机性会明显造成模态频率分散性的提高，而模态振型的分散性主要来自材料密度的随机性，组分材料弹性模量的随机性及体积组分指数对其影响不大．

关键词: 功能梯度材料, 梁, 轴向, 随机性, 动力特性

Abstract:

The uncertainty in effective physical properties is inherent since the manufacturing and fabrication processes of FGM (Functionally Graded Materials) are extremely complex. Based on the high-order shear deformation theory, the finite element model is developed for the FGM beam with material properties varying in the axial direction, taking into account the shear deformation. Using the moment method of the random function, the statistics of dynamic characteristics for the FGM beam is calculated, and the effect of random constituent material properties on the dynamic characteristics for the FGM beam is systemically investigated in the case of different volume fraction indexes. The Monte-Carlo method is used to verify the presented method. Numerical results show the dominant effect of the constituent volume fraction index on the dispersion in dynamic characteristics, and the dispersion in modal frequencies becomes higher when more material properties are considered random, and the dispersion in mode shapes depends mainly on the randomness of constituent material mass densities, while the volume fraction index and random elastic modulus of constituent materials have little influence on mode shapes.

Key words: functionally graded material, beam, axial direction, randomness, dynamic characteristics

中图分类号:

TU311

陈永琴;徐亚兰. 随机功能梯度材料梁的动力特性分析[J]. J4, 2015, 42(6): 99-105.

CHEN Yongqin;XU Yalan. Dynamic characteristics analysis for the random FGM beam[J]. J4, 2015, 42(6): 99-105.

参考文献

［1］ Koizumi M. Concept of FGM［J］. Ceramic Transaction, 1993, 34: 3-10.
［2］仲政, 吴林志, 陈伟球. 功能梯度材料与结构的若干力学问题研究进展［J］. 力学进展, 2010, 40(5): 528-542.
Zhong Zheng, Wu Linzhi, Chen Weiqiu. Progress in the Study on Mechanics Problems of Functionally Graded Materials and Structures［J］. Advances in Mechanics, 2010, 40(5): 528-542.
［3］ Reddy J N. Analysis of Functionally Graded Plates［J］. International Journal of Numerical Methods in Engineering, 2000, 47: 663-684.
［4］黄小林, 沈惠申. 热环境下功能梯度材料板的自由振动和动力响应［J］. 工程力学, 2005, 22(3): 224-229.
Huang Xiaolin, Shen Huishen. Free Vibration and Dynamic Response of Functionally Grades Plates in Thermal Environments［J］. Engineering Mechanics, 2005, 22(3): 224-229.
［5］杜长城, 李映辉. 功能梯度简支矩形板的非线性动力响应［J］. 固体力学学报, 2013, 34(4): 361-367.
Du Changcheng, Li Yinghui. Nonlinear Dynamic Response of Simply-supported Functionally Graded Rectangular Plates［J］. Chinese Journal of Solid Mechanics, 2013, 34(4): 361-367.
［6］ Ferrante F J, Graham-Brady L L. Stochastic Simulation of Non-Gaussian/non-stationary Properties in a Functionally Graded Plate［J］. Computer Methods in Applied Mechanics and Engineering, 2005, 194(12-16): 1675-1692.
［7］方永锋, 陈建军, 闫彬. 结构动态非概率可靠性预测模型［J］. 西安电子科技大学学报, 2012, 39(6): 170-175.
Fang Yongfeng, Chen Jianjun, Yan Bin. Model for Prediction of Structural Dynamic Non-probabistic Reliability［J］. Journal of Xidian University, 2012, 39(6): 170-175.
［8］ Yang J, Liew K M, Ktipornchai S. Stochastic Analysis of Compositionally Graded Plates with System Randomness under Static Loading［J］. International Journal of Mechanical Science, 2005, 47: 1519-1541.
［9］ Onkar A K, Upadhyay C S, Yadav D. Generalized Buckling Analysis of Laminated Plates with Random Material Properties Using Stochastic Finite Elements［J］. International Journal of Mechanical Science, 2006, 48: 780-798.
［10］ Niranjan L, Achchhe L. Stochastic Nonlinear Bending Response of Piezoelectric Functionally Graded Beam Subjected to Thermo-electro-mechanical Loadings with Random Material Properties［J］. Composite Structures, 2013, 100: 17-33.
［11］ Mohammad T, Singh B N. Stochastic Perturbation-Based Finite Element for Buckling Statistics of FGM Plates with Uncertain Material Properties in Thermal Environments［J］. Composite Structures, 2014, 108: 823-833.
［12］ Alshorbagy E A, Eltaher M A, Mahmoud F F. Free Vibration Characteristics of a Functionally Graded Beam by Finite Element Method［J］. Applied Mathematical Modelling, 2011, 35: 412-425.

[1]	朱苏雅,杜建超,李云松,汪小鹏. 采用U-Net卷积网络的桥梁裂缝检测方法[J]. 西安电子科技大学学报, 2019, 46(4): 35-42.
[2]	黄勇;刘芳. 场景语义SAR图像桥梁检测算法[J]. 西安电子科技大学学报, 2018, 45(4): 40-44.
[3]	靳红玲;郭成洋;陈军;陈建军. 空间柔性梁的动态可靠性分析[J]. 西安电子科技大学学报, 2017, 44(6): 138-143.
[4]	王南;马娟;张玉林. 一种三维线弹性随机数值均化方法[J]. 西安电子科技大学学报, 2016, 43(4): 92-99.
[5]	靳红玲;陈建军;赵宽;曹鸿钧. 空间柔性梁的随机动力学分析[J]. J4, 2015, 42(4): 47-52+62.
[6]	李鹏;许万业;仇原鹰;李华平. 大型介质夹层天线罩的电性能补偿方法[J]. J4, 2013, 40(6): 78-84.
[7]	赵宽;陈建军;曹鸿钧;云永琥. 随机参数旋转柔性梁运动功能可靠性分析[J]. J4, 2013, 40(5): 141-147.
[8]	王敏娟;陈建军;周育保;云永琥;马洪波. 区间参数相关性的智能梁结构动力特性分析[J]. J4, 2013, 40(3): 126-131.
[9]	孙昱;蒋馥蔚;夏靖波;赵小欢;申健;李明辉. 一种改进的高速网络分布式流量抽样算法[J]. J4, 2013, 40(3): 160-165.
[10]	刘焕玲;贾建援;殷磊. 轴向热传导和入口效应对圆形微通道对流换热特性的影响 [J]. J4, 2008, 35(5): 916-921.
[11]	陈建军;赵颖颖;黄居锋;拓耀飞. 随机参数链式机械系统动力特性分析[J]. J4, 2005, 32(6): 829-832.
[12]	梁震涛;陈建军;马洪波. 随机参数板梁组合结构有限元分析的随机因子法[J]. J4, 2005, 32(2): 201-205.
[13]	董丽华;高军涛;胡予濮. 一类广义自缩序列的伪随机性[J]. J4, 2004, 31(3): 394-398.

随机功能梯度材料梁的动力特性分析

Dynamic characteristics analysis for the random FGM beam

PDF (PC)

赞

可视化

被引次数

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 13

Metrics

本文评价

推荐阅读 10