西安电子科技大学学报

• 研究论文 • 上一篇    下一篇

最优时间的无零矢量有限状态预测控制

张海玮1,2;吴爱国1   

  1. (1. 天津大学 电气自动化与信息工程学院,天津 300072;
    2. 天津大学 仁爱学院,天津 301636)
  • 收稿日期:2017-05-12 出版日期:2018-06-20 发布日期:2018-07-18
  • 作者简介:张海玮(1983-),女,讲师,天津大学博士研究生,E-mail: zhwei@tju.edu.cn
  • 基金资助:

    天津市自然科学基金应用基础与前沿技术研究计划资助项目(15JCZDJC32100)

Non-zero vector finite-control-set model predictive control for optimal time

ZHANG Haiwei1,2;WU Aiguo1   

  1. (1. School of Electrical and Information Engineering, Tianjin Univ., Tianjin 300072, China;
    2. Tianjin Univ. Renai College, Tianjin 301636, China)
  • Received:2017-05-12 Online:2018-06-20 Published:2018-07-18

摘要:

针对三相逆变二电平电路运行特性和交流侧共模电压抑制需求,提出了一种最优时间序列的三相逆变器无零矢量有限状态预测控制.在传统有限控制集模型电流预测控制基础上舍弃零矢量,以减小输出电流偏差为目标构造价值函数;非零矢量采用最优作用时间,以消除共模干扰的最大值.通过实验表明,改进策略有效地降低了共模电压,改善了输出电流的对称性,提高了稳态精度.

关键词: 共模电压, 有限控制集模型预测, 最优时间, 无零矢量

Abstract:

The non-zero vector finite control set (FCS) model current prediction control based on the time optimization is proposed in the three-phase inverter. The zero vector is discarded in the traditional finite control set model. The cost function is constructed in order to reduce the output current deviation and the optimal time of the nonzero vector is calculated to eliminate the maximum of the common-mode voltage. Experimental results demonstrate that the proposed model can effectively reduce the common mode voltage, improve the symmetry of the output current and improve the steady-state precision.

Key words: common mode voltage, finite control set model prediction, optimal time, non-zero vector

Baidu
map