随机FG-CNTRC结构的动力特性分析

doi:10.19665/j.issn1001-2400.2019.06.020

西安电子科技大学学报 ›› 2019, Vol. 46 ›› Issue (6): 140-146.doi: 10.19665/j.issn1001-2400.2019.06.020

随机FG-CNTRC结构的动力特性分析

李琳,徐亚兰()

西安电子科技大学机电工程学院, 陕西西安 710071

收稿日期:2019-07-20 出版日期:2019-12-20 发布日期:2019-12-21
通讯作者: 徐亚兰
作者简介:李琳 (1995—),女,西安电子科技大学硕士研究生,E-mail:2482246975@qq.com
基金资助:
国家自然科学基金(11502183);陕西省自然科学基金(2016JM1021)

Analysis of dynamic characteristics of random FG-CNTRC structures

LI Lin,XU Yalan()

School of Mechano-Electronic Engineering, Xidian Univ., Xi’an 710071, China

Received:2019-07-20 Online:2019-12-20 Published:2019-12-21
Contact: Yalan XU

摘要/Abstract

摘要：

为考查功能梯度碳纳米管增强复合材料结构中组分材料物理参数及组分分布随机性对结构固有频率的影响,采用高阶剪切变形理论及广义混合律建立了碳纳米管在不同排布方式下梁结构的有限元动力学模型;运用一阶摄动法引入随机变量参数,建立了随机有限元模型,确定了结构固有频率数字特征与随机组分材料物理参数及组分分布数字特征之间的关系。结果表明,组分材料物理参数随机性对结构固有频率分散性的贡献远大于组分分布随机性的贡献;随着碳纳米管体积分数的增加,碳纳米管X型功能梯度排布下结构固有频率的分散性由衰减转为迅速增加,O型功能梯度排布下结构固有频率分散性仍处于衰减状态。

关键词: 功能梯度碳纳米管增强复合材料, 一阶摄动法, 随机变量, 随机有限元, 固有频率

Abstract:

In order to investigate the influences of the randomness of physical parameters of constituent materials and constituent distribution on natural frequencies of a functionally graded carbon nanotube reinforced composite structure, a finite element dynamics model is developed for a beam structure with different arrangements of carbon nanotube by using the high-order shear deformation theory and generalized mixture law. The first-order perturbation method is used to introduce the random variables and the stochastic finite element model is established. The numerical characteristics relationships between natural frequencies and the randomness of physical parameters of constituent materials as well as constituent distribution are derived. The results show that the contribution of the randomness of physical parameters of constituent materials to the scattering of natural frequencies is much greater than the constituent distribution. The dispersion of natural frequencies for the carbon nanotube X-type decreases with the increase in volume fraction at the very beginning, and then turns to increase rapidly. However, O-type natural frequencies dispersion is still in the attenuated state.

Key words: functionally graded carbon nanotube reinforced composite material, first-order perturbation method, random variable, stochastic finite element, natural frequency

中图分类号:

TU311

李琳,徐亚兰. 随机FG-CNTRC结构的动力特性分析[J]. 西安电子科技大学学报, 2019, 46(6): 140-146.

LI Lin,XU Yalan. Analysis of dynamic characteristics of random FG-CNTRC structures[J]. Journal of Xidian University, 2019, 46(6): 140-146.

图/表 6

图1

图2

表1

材料属性"

材料	弹性模量	质量密度	泊松比	剪切模量
CNT	$E 11 CNT$ =5.646 6Tpa	ρ^CNT=1.4g/cm²	$ν 12 CNT$ =0.175	$G 12 CNT$ =1.944 5Tpa
PmPv	E_m=2.1Gpa	ρ^m=1.15g/cm²	ν^m=0.34	G_m=0.850Gpa

表1

图3

图4

图5

参考文献 13

[1]	张东飞, 姚亚刚, 祝泽周 , 等. 碳纳米管制备及其复合材料导热性能研究进展[J]. 集成技术, 2019,8(1):78-87.
	ZHANG Dongfei, YAO Yagang, ZHU Zezhou , et al. Progress in Preparation of Carbon Nanotubes and the Application in Composites for Thermal Conduction[J]. Journal of Integration Technology, 2019,8(1):78-87.
[2]	SHOKRIEH M M, RAFIEE R . Stochastic Multi-scale Modeling of CNT/Polymer Composites[J]. Computational Materials Science, 2010,50(2):437-446. doi: 10.1016/j.commatsci.2010.08.036
[3]	艾立燎 . 碳纳米管随机增强聚合物基复合材料的多尺度力学性能研究[D]. 广州: 暨南大学, 2015.
[4]	孙蒙蒙, 常春蕊, 张志明 , 等. 沉积法掺金改善碳纳米管电接触特性[J]. 西安电子科技大学学报, 2019,46(1):151-157.
	SUN Mengmeng, CHANG Chunrui, ZHANG Zhiming , et al. Study of Improving the Electrical Contact Performance of Carbon Nanotubes by Doping Au Using the Deposition Method[J]. Journal of Xidian University, 2019,46(1):151-157.
[5]	XU Y L, QIAN Y, SONG G B . Stochastic Finite Element Method for Free Vibration Characteristics of Random FGM Beams[J]. Applied Mathematical Modeling, 2016,40(23/24):10238-10253. doi: 10.1016/j.apm.2016.07.025
[6]	XU Y L, QIAN Y, CHEN J J , et al. Stochastic Dynamic Characteristics of FGM Beams with Random Material Properties[J]. Composite Structures, 2015,133:585-594. doi: 10.1016/j.compstruct.2015.07.057
[7]	靳红玲, 陈建军, 赵宽 , 等. 空间柔性梁的随机动力学分析[J]. 西安电子科技大学学报, 2015, 42(4): 47-52+62.
	JIN Hongling, CHEN Jianjun, ZHAO Kuan , et al. Stochastic Dynamic Analysis of a Spatial Flexible Beam[J]. Journal of Xidian University, 2015, 42(4): 47-52+62.
[8]	KELESHTERI M M, ASADI H, AGHDAM M M . Nonlinear Bending Analysis of FG-CNTRC Annular Plates with Variable Thickness on Elastic Foundation[J]. Thin-Walled Structures, 2019,135:453-462. doi: 10.1016/j.tws.2018.11.020
[9]	DUC N D, HADAVINIA H, QUAN T Q , et al. Free Vibration and Nonlinear Dynamic Response of Imperfect Nanocomposite FG-CNTRC Double Curved Shallow Shells in Thermal Environment[J]. European Journal of Mechanics, A/Solids, 2019,75:355-366. doi: 10.1016/j.euromechsol.2019.01.024
[10]	ZHONG R, WANG Q S, TANG J Y , et al. Vibration Analysis of Functionally Graded Carbon Nanotube Reinforced Composites (FG-CNTRC) Circular, Annular and Sector Plates[J]. Composite Structures, 2018,194:49-67. doi: 10.1016/j.compstruct.2018.03.104
[11]	ALIBEIGLOO A, EMTEHANI A . Static and Free Vibration Analyses of Carbon Nanotube-reinforced Composite Plate Using Differential Quadratic Method[J]. Meccanica, 2015,50(1):61-76. doi: 10.1007/s11012-014-0050-7
[12]	TORABI J, ANSARI R, HASSANI R . Numerical Study on the Thermal Buckling Analysis of CNT-reinforced Composite Plates with Different Shapes Based on the Higher-order Shear Deformation Theory[J]. European Journal of Mechanics, A/Solids, 2019,73:144-160. doi: 10.1016/j.euromechsol.2018.07.009
[13]	THANH N V, KHOA N D, TUAN N D , et al. Nonlinear Dynamic Response and Vibration of Functionally Graded Carbon Nanotube-reinforced Composite (FG-CNTRC) Shear Deformable Plates with Temperature-dependent Material Properties and Surrounded on Elastic Foundations[J]. Journal of Thermal Stresses, 2017,40(10):1254-1274. doi: 10.1080/01495739.2017.1338928

随机FG-CNTRC结构的动力特性分析

Analysis of dynamic characteristics of random FG-CNTRC structures

RichHTML

PDF (PC)

赞

可视化

摘要/Abstract

引用本文

使用本文

图/表 6

参考文献 13

相关文章 4

Metrics

本文评价

推荐阅读 10

[1]	尤芳;陈建军;曹鸿钧;谢永强. 随机变量下的热传导结构拓扑优化设计[J]. J4, 2014, 41(6): 111-117.
[2]	李金平;陈建军;刘海锋;徐健;黄宵忭. 基于Neumann展开Monte-Carlo有限元法的随机温度场分析 [J]. J4, 2007, 34(3): 453-457.
[3]	陈建军;赵颖颖;黄居锋;拓耀飞. 随机参数链式机械系统动力特性分析[J]. J4, 2005, 32(6): 829-832.
[4]	暂时无作者信息. 某舰用雷达天线及天线座结构系统动力设计[J]. J4, 1997, 24(1): 0-0.