J4 ›› 2011, Vol. 38 ›› Issue (4): 133-136.doi: 10.3969/j.issn.1001-2400.2011.04.024

• Original Articles • Previous Articles     Next Articles

Miniaturized design of the RF power divider

XING Mengjiang;YANG Yintang;LI Yuejin   

  1. (Research Inst. of Microelectronics, Xidian Univ., Xi'an  710071, China)
  • Received:2010-12-28 Online:2011-08-20 Published:2011-09-28
  • Contact: XING Mengjiang E-mail:mjxing@mail.xidian.edu.cn

Abstract:

A miniaturized power divider design method by replacing the λ/4 transmission line with an equivalent circuit is proposed. By using Ferro A6 LTCC substrates with the multi-layer dielectric constant of 5.9, a bandwidth of 200MHz, the center frequency of 1.616GHz multilayer power divider is designed and measured by use of Low Temperature Co-fired Ceramic (LTCC) technology. Its performance can be comparable to the Wilkinson power divider, with its size being 3.2mm×1.6mm×0.9mm, which is less than 1/10 of the Wilkinson power divider.

Key words: power divider, λ/4 transmission line, low temperature co-fired ceramic

CLC Number: 

  • TN386

Baidu
map