多尺度方法预测复合材料层板裂纹扩展

doi:10.3969/j.issn.1001-2400.2018.03.009

Abstract

Abstract:

In order to investigate the failure distribution of composites on micro and macro scales, this paper proposes a multi-scale method based on the High-Fidelity Generalized Method of Cells (HFGMC), which is applied to acquire strains and stresses on the macro scale, as well as on the micro scale. Combined with the multi-scale damage model, the component damages and crack extension are studied. The micro mechanics model requires fiber／matrix properties, strength parameters and the fiber volume rather than the properties and strengths of composites. The structural module requires further development for implementation of HFGMC into FE software ANSYS-LSDYNA via the user defined material subroutines (UMAT), which is used to analyze the stress distribution, components damage, and crack extension of laminates under the axial tensile condition. The calculated results are compared with the experimental results. The result indicates that the numerical load-stress curves agree with the experimental curves very well and that the predicted crack extension coincides with the experimental results.

Key words: composites, high-fidelity generalized method of cells, multi-scale damage analysis, crack extension

CHU Chenchen;CAI Heng;QIAO Xiaojun;YE Junjie. Predicting the crack extension of composites based on the multi-scale method[J].Journal of Xidian University, 2018, 45(3): 45-51.

References

［1］刘万雷, 常新龙, 张晓军, 等. 基于改进Hashin准则的复合材料低速冲击损伤研究［J］. 振动与冲击, 2016,(12): 209-214.
LIU Wanglei, CHANG Xinlong, ZHANG Xiaojun, et al. Low-velocity Impact Analysis of Composite Plates Based on Modified Hashin Criterion ［J］. Journal of Vibration and Shock, 2016,(12): 209-214.
［2］ BELINGARDI G, MEHDIPOUR H, MANGINO E, et al. Progressive Damage Analysis of a Rate-dependent Hybrid Composite Beam［J］. Composite Structures, 2016, 154: 433-442.
［3］ KANG J, BOLANDER J E. Multiscale Modeling of Strain-hardening Cementitious Composites［J］. Mechanics Research Communications, 2016, 78: 47-54.
［4］ YE J, QIU Y, CHEN X, et al. Initial and Final Failure Strength Analysis of Composites Based on a Micromechanical Method［J］. Composite Structures, 2015, 125: 328-335.
［5］李力, 赵海涛, 陈吉安, 等. 基于多尺度方法的纤维织物增强柔性复合材料拉伸模量预测［J］. 复合材料学报, 2016, 33(10): 2312-2318.
LI Li, ZHAO Haitao, CHEN Ji'an, et al. Tensile Modulus Prediction on Fiber Fabric Reinforced Flexible Composite Based on Multi-dimension Method ［J］. Acta Materiae Compositae Sinica, 2016, 33(10): 2312-2318.
［6］ NERILLI F, VAIRO G. Progressive Damage in Composite Bolted Joints via a Computational Micromechanical Approach［J］. Composites Part B: Engineering, 2017, 111: 357-371.
［7］ BEDNARCYK B A, ABOUDI J, ARNOLD S M. Analysis of Fiber Clustering in Composite Materials Using High-fidelity Multiscale Micromechanics［J］. International Journal of Solids and Structures, 2015, 69/70: 311-327.
［8］ ABOUDI J, ARNOLD S M, BEDNARCYK B A. Micromechanics of Composite Materials: a Generalized Multiscale Analysis Approach ［M］. Oxford: Butterworth-Heinemann, 2012: 53.
［9］方国东. 三维四向碳/环氧编织复合材料积累损伤及失效分析［D］. 哈尔滨: 哈尔滨工业大学, 2010.
［10］翟智. 多尺度嵌套细化方法及其在复合材料结构健康监测的应用［D］. 西安: 西安交通大学，2014.
［11］叶俊杰. 基于单胞模型的纤维增强复合材料细观力学性能研究及应用［D］. 西安: 西安交通大学，2011.

Predicting the crack extension of composites based on the multi-scale method

PDF (PC)

Like

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 1

Metrics

Comments

Recommended 10